Cp2102 Usb To Ttl Serial Uart Converter Cable
- Usb To Ttl Serial Cable
- Usb To Ttl Serial Cable Pinout
- USB To Serial (TTL) Adapter, Silicon Labs CP2102
USB to Serial TTL Cable, 3.3V, 5-pin Female Header » Quick Find Enter keywords to find the product you are looking for in the Quick Find field above or use Categories Information USB to Serial TTL Cable, 3.3V, 5-pin Female Header, 1.8m US$22.00 4DProgrammingCable The 4D Programming Cable is a USB-to-Serial TTL UART converter cable. It incorporates the SiLabs CP2102 USB-to-Serial UART bridge IC which handles all the USB signaling and protocols. It is an essential hardware tool used for programming PmmC firmware files and 4DGL user code downloads into the GOLDELOX and PICASO processors embedded in many modules and displays we carry from 4D Systems.
The cable's 5-pin female header (0.1'/2.54mm pitch) plugs directly into the 4D modules, providing TTL levels of 3.3V for RX and TX. The cable also provides +5V DC supply to power the target device. The cable is 1.8m in length and the circuitry is USB-powered (USB 2.0 compliant full speed @ 12Mbps), supporting data rates from 300bps to 1Mbps.
The cable contains a small internal electronic circuit board, utilizing the CP2102 chip and special RESET circuitry, which is encapsulated into the USB connector at the end of the cable. The 5-pin header is labeled with the appropriate signal names: +5V, RX, TX, GND, RESET which match the programming headers on the 4D devices. This cable is designed specifically to interface directly with all 4D Systems devices that use a 5-pin programming header. In any non-4D device application, make sure the TX and RX lines from the cable are crossed over to the attached peripheral, i.e., the TX from the cable connects to the RX of the target and the RX from the cable connects to the TX of the target.
Note: The TX and RX signal levels are between 0.0 Volts and 3.3 Volts.
Usb To Ttl Serial Cable
This USB to TTL Serial board based on the CP2102 chip. Mod a USB to TTL Serial Adapter (CP2102) to Program Arduino Pro Mini. And the USB adapter doesn't.
Usb To Ttl Serial Cable Pinout
Find great deals on eBay for usb UART TTL CP2102. USB 2.0 to TTL CP2102 UART Serial Converter Module 5P STC PRGMR with cable. USB TTL Cable. USB-TTL UART Module - CP2102. High Quality USB to TTL converter. How to assign unique serial number to each CP2102 so multiple units can work on same PC with.
USB To Serial (TTL) Adapter, Silicon Labs CP2102
From the seller gowinelectronic, this module is used to program my Arduino Pro Mini compatible chip also from the same seller, gowin electronic: in order for the module to work, please install the proper drivers: schematic diagrams on how to connect this to program the Arduino Pro Mini: just follow the tutorial above. Open the Arduino IDE, select tools and change your Board to Arduino Pro Mini and select 5V 16MHz for the kind of Pro Mini. By default, the LED should blink on the Arduino Pro Mini even before programming the chip, this is the default manufacturing settings for these kinds of chip, presumably for testing.